Building Spark

Building Spark using Maven requires Maven 3.0.4 or newer and Java 6+.

Note: Building Spark with Java 7 or later can create JAR files that may not be readable with early versions of Java 6, due to the large number of files in the JAR archive. Build with Java 6 if this is an issue for your deployment.

Setting up Maven’s Memory Usage

You’ll need to configure Maven to use more memory than usual by setting MAVEN_OPTS. We recommend the following settings:

export MAVEN_OPTS="-Xmx2g -XX:MaxPermSize=512M -XX:ReservedCodeCacheSize=512m"

If you don’t run this, you may see errors like the following:

[INFO] Compiling 203 Scala sources and 9 Java sources to /Users/me/Development/spark/core/target/scala-2.10/classes...
[ERROR] PermGen space -> [Help 1]

[INFO] Compiling 203 Scala sources and 9 Java sources to /Users/me/Development/spark/core/target/scala-2.10/classes...
[ERROR] Java heap space -> [Help 1]

You can fix this by setting the MAVEN_OPTS variable as discussed before.

Note: For Java 8 and above this step is not required.

Specifying the Hadoop Version

Because HDFS is not protocol-compatible across versions, if you want to read from HDFS, you’ll need to build Spark against the specific HDFS version in your environment. You can do this through the “hadoop.version” property. If unset, Spark will build against Hadoop 1.0.4 by default. Note that certain build profiles are required for particular Hadoop versions:

Hadoop versionProfile required
0.23.xhadoop-0.23
1.x to 2.1.x(none)
2.2.xhadoop-2.2
2.3.xhadoop-2.3
2.4.xhadoop-2.4

For Apache Hadoop versions 1.x, Cloudera CDH “mr1” distributions, and other Hadoop versions without YARN, use:

# Apache Hadoop 1.2.1
mvn -Dhadoop.version=1.2.1 -DskipTests clean package

# Cloudera CDH 4.2.0 with MapReduce v1
mvn -Dhadoop.version=2.0.0-mr1-cdh4.2.0 -DskipTests clean package

# Apache Hadoop 0.23.x
mvn -Phadoop-0.23 -Dhadoop.version=0.23.7 -DskipTests clean package

For Apache Hadoop 2.x, 0.23.x, Cloudera CDH, and other Hadoop versions with YARN, you can enable the “yarn-alpha” or “yarn” profile and optionally set the “yarn.version” property if it is different from “hadoop.version”. The additional build profile required depends on the YARN version:

YARN versionProfile required
0.23.x to 2.1.xyarn-alpha (Deprecated.)
2.2.x and lateryarn

Note: Support for YARN-alpha API’s will be removed in Spark 1.3 (see SPARK-3445).

Examples:

# Apache Hadoop 2.0.5-alpha
mvn -Pyarn-alpha -Dhadoop.version=2.0.5-alpha -DskipTests clean package

# Cloudera CDH 4.2.0
mvn -Pyarn-alpha -Dhadoop.version=2.0.0-cdh4.2.0 -DskipTests clean package

# Apache Hadoop 0.23.x
mvn -Pyarn-alpha -Phadoop-0.23 -Dhadoop.version=0.23.7 -DskipTests clean package

# Apache Hadoop 2.2.X
mvn -Pyarn -Phadoop-2.2 -Dhadoop.version=2.2.0 -DskipTests clean package

# Apache Hadoop 2.3.X
mvn -Pyarn -Phadoop-2.3 -Dhadoop.version=2.3.0 -DskipTests clean package

# Apache Hadoop 2.4.X or 2.5.X
mvn -Pyarn -Phadoop-2.4 -Dhadoop.version=VERSION -DskipTests clean package

Versions of Hadoop after 2.5.X may or may not work with the -Phadoop-2.4 profile (they were
released after this version of Spark).

# Different versions of HDFS and YARN.
mvn -Pyarn-alpha -Phadoop-2.3 -Dhadoop.version=2.3.0 -Dyarn.version=0.23.7 -DskipTests clean package

Building With Hive and JDBC Support

To enable Hive integration for Spark SQL along with its JDBC server and CLI, add the -Phive and Phive-thriftserver profiles to your existing build options. By default Spark will build with Hive 0.13.1 bindings. You can also build for Hive 0.12.0 using the -Phive-0.12.0 profile.

# Apache Hadoop 2.4.X with Hive 13 support
mvn -Pyarn -Phadoop-2.4 -Dhadoop.version=2.4.0 -Phive -Phive-thriftserver -DskipTests clean package

# Apache Hadoop 2.4.X with Hive 12 support
mvn -Pyarn -Phadoop-2.4 -Dhadoop.version=2.4.0 -Phive -Phive-0.12.0 -Phive-thriftserver -DskipTests clean package

Building for Scala 2.11

To produce a Spark package compiled with Scala 2.11, use the -Dscala-2.11 property:

dev/change-version-to-2.11.sh
mvn -Pyarn -Phadoop-2.4 -Dscala-2.11 -DskipTests clean package

Scala 2.11 support in Spark is experimental and does not support a few features. Specifically, Spark’s external Kafka library and JDBC component are not yet supported in Scala 2.11 builds.

Spark Tests in Maven

Tests are run by default via the ScalaTest Maven plugin.

Some of the tests require Spark to be packaged first, so always run mvn package with -DskipTests the first time. The following is an example of a correct (build, test) sequence:

mvn -Pyarn -Phadoop-2.3 -DskipTests -Phive -Phive-thriftserver clean package
mvn -Pyarn -Phadoop-2.3 -Phive -Phive-thriftserver test

The ScalaTest plugin also supports running only a specific test suite as follows:

mvn -Dhadoop.version=... -DwildcardSuites=org.apache.spark.repl.ReplSuite test

Continuous Compilation

We use the scala-maven-plugin which supports incremental and continuous compilation. E.g.

mvn scala:cc

should run continuous compilation (i.e. wait for changes). However, this has not been tested extensively. A couple of gotchas to note: * it only scans the paths src/main and src/test (see docs), so it will only work from within certain submodules that have that structure. * you’ll typically need to run mvn install from the project root for compilation within specific submodules to work; this is because submodules that depend on other submodules do so via the spark-parent module).

Thus, the full flow for running continuous-compilation of the core submodule may look more like: $ mvn install $ cd core $ mvn scala:cc

Building Spark with IntelliJ IDEA or Eclipse

For help in setting up IntelliJ IDEA or Eclipse for Spark development, and troubleshooting, refer to the wiki page for IDE setup.

Building Spark Debian Packages

The Maven build includes support for building a Debian package containing the assembly ‘fat-jar’, PySpark, and the necessary scripts and configuration files. This can be created by specifying the following:

mvn -Pdeb -DskipTests clean package

The debian package can then be found under assembly/target. We added the short commit hash to the file name so that we can distinguish individual packages built for SNAPSHOT versions.

Running Java 8 Test Suites

Running only Java 8 tests and nothing else.

mvn install -DskipTests -Pjava8-tests

Java 8 tests are run when -Pjava8-tests profile is enabled, they will run in spite of -DskipTests. For these tests to run your system must have a JDK 8 installation. If you have JDK 8 installed but it is not the system default, you can set JAVA_HOME to point to JDK 8 before running the tests.

Building for PySpark on YARN

PySpark on YARN is only supported if the jar is built with Maven. Further, there is a known problem with building this assembly jar on Red Hat based operating systems (see SPARK-1753). If you wish to run PySpark on a YARN cluster with Red Hat installed, we recommend that you build the jar elsewhere, then ship it over to the cluster. We are investigating the exact cause for this.

Packaging without Hadoop Dependencies for YARN

The assembly jar produced by mvn package will, by default, include all of Spark’s dependencies, including Hadoop and some of its ecosystem projects. On YARN deployments, this causes multiple versions of these to appear on executor classpaths: the version packaged in the Spark assembly and the version on each node, included with yarn.application.classpath. The hadoop-provided profile builds the assembly without including Hadoop-ecosystem projects, like ZooKeeper and Hadoop itself.

Building with SBT

Maven is the official recommendation for packaging Spark, and is the “build of reference”. But SBT is supported for day-to-day development since it can provide much faster iterative compilation. More advanced developers may wish to use SBT.

The SBT build is derived from the Maven POM files, and so the same Maven profiles and variables can be set to control the SBT build. For example:

sbt/sbt -Pyarn -Phadoop-2.3 assembly

Testing with SBT

Some of the tests require Spark to be packaged first, so always run sbt/sbt assembly the first time. The following is an example of a correct (build, test) sequence:

sbt/sbt -Pyarn -Phadoop-2.3 -Phive -Phive-thriftserver assembly
sbt/sbt -Pyarn -Phadoop-2.3 -Phive -Phive-thriftserver test

To run only a specific test suite as follows:

sbt/sbt -Pyarn -Phadoop-2.3 -Phive -Phive-thriftserver "test-only org.apache.spark.repl.ReplSuite"

To run test suites of a specific sub project as follows:

sbt/sbt -Pyarn -Phadoop-2.3 -Phive -Phive-thriftserver core/test

Speeding up Compilation with Zinc

Zinc is a long-running server version of SBT’s incremental compiler. When run locally as a background process, it speeds up builds of Scala-based projects like Spark. Developers who regularly recompile Spark with Maven will be the most interested in Zinc. The project site gives instructions for building and running zinc; OS X users can install it using brew install zinc.